Photography, Reviews

Sturdier, even more accurate Lumu Pro iOS light meter measures flash colour temperature

lumu pro light meter ios

Lumu released its new generation of Lightning-connected iOS light meter sensors just in time for Christmas. The original Lumu Power has proven to be a very accurate light meter sensor but is too slow to measure the colour temperature of a strobe or speedlight. The new Lumu Pro is fast enough.

The new generation is actually a series of three meters. One is the Lite version which only measures ambient (also cine/video) and flash exposure. The Lumu Power 2 also measures illuminance, chromaticity and colour temperature, and the Pro – the one I’m reviewing – also lets you measure flash colour temperature.

The form factor hasn’t changed, but the quality of build has been further improved, resulting in an even more robust, stronger device. The new sensors inside are a tad more accurate than those of the first version, but the difference is marginal, which is no surprise as the first one’s readings were already very, very close to Sekonic’s top meter. Still, I saw a better readout in all areas of about a tenth of an EV value. The colour metering is as accurate as it’s always been, only much, much faster with the Lumu Pro.

To give you an idea of how fast that is: in HSS flash mode, a Rotolight NEO 2 outputs a continuously fluctuating (pulse) light before you actually push the exposure button on your camera and activate the flash itself. This pulsating activity is not captured by the first-generation Lumu Power (nor by an Illuminati Bluetooth light meter), but it is by the Lumu Pro. That means the app shows you the Lumu Pro’s measurement for every so-many pulses the iOS app itself is able to capture. And as the Lumu Pro is tethered, that’s a great many readouts you see quickly appearing and disappearing.

Speaking of the app, the interface is still the same clear-cut straightforward design with only the features that the Lumu sensor can handle appearing upon connection.

In testing, I wasn’t surprised to see that the new Lumu Pro gave me much the same readings as the old one. But in circumstances where the old one would hesitate between tenths of a value, the new one would quickly decide for one. And low light has a new meaning for the Lumu Pro; even with candlelight the light meter measured correctly.

Of course, the new flash colour metering functionality is the flagship feature, so I tested that one over and over again.

What I found was that the Lumu Pro comes closer than the other iOS light meter I used for the test (it was on par with the one “real” meter I used). To see how accurate it was, and lacking a proper spectrophotometer that’s fast enough to capture flash output, I ran a test that’s not scientific but gives a good idea of how well the Lumu Pro reads the colour temperature of a strobe or flash.

I took a picture of a ColorChecker Passport with two of the flashes I have (Hahnel and Metz) at different distances and rapid-firing them to see if there would be a difference in colour temperature with the second firing done at less battery charge than the first.

I then fed the images into Affinity Photo and used the White Balance eyedropper to see if there was a difference bigger than deltaE 3 (which is the smallest visible difference between colours). None of the tests came out with a difference of more than deltaE 2, with 80% of them differing less than deltaE 2.

I think that shows how well the Lumu Pro can replace a top-of-the-line dedicated light meter that costs double the $499 Lumu Labs is asking for their flagship meter. If you don’t need flash colour metering, then the Lumu Power 2 costs $399. You can upgrade the first generation Lumu Power to a Lumu Pro at a $150 discount.

Since you’re here …

… I have a small favour to ask. More people are reading Visuals Producer than ever but there’s no advertising revenues coming my way and I have no budget for pretty much anything these days but the basics and a roof above my head. So you can see why I need to ask for your help.

Visuals Producer is editorially independent, meaning I set my own agenda and am not paid by the vendors of the products that I review, the articles that I write or the videos that I make. No one edits my content. No one steers my opinion. This is important because it enables me to give an objective view of a product, service or organisation. It’s what makes me different to so many others who are paid for writing or giving opinions in a video, at a time when factual, honest reporting is critical.

If everyone who reads my reporting, who likes it, helps to support it, my future would be much more secure. Support Visuals Producer with 5 Euros and, as a token of my gratitude, you’ll be able to immediately download a set of 50 sounds (with more to come) I carefully recorded with an industry standard microphone and an Apogee Duet iOS/Mac for use in videos and movies without having to worry about copyright or other legalities. Thank you.

Click on the image below to get the collection of 50 carefully recorded sounds of indoors activities and actions. Saved in 16-bit 48KHz AIFF format. If you need WAV files or a higher bitrate, send an email to editor [at] containing your receipt for the download and I’ll send you the same collection in 16-bit or 24-bit WAV or AIF or both.